When something goes wrong with the power in your home or building, you need a straight answer and a prompt visit. Huntersville Electrical Company handles residential and commercial electrical work across Huntersville and Mecklenburg County, from urgent repairs to full panel upgrades and new wiring. Whether you own a home, manage a rental portfolio, or run a commercial space, we cover the full range: troubleshooting, outlets and lighting, breaker panels, wiring, EV chargers, backup generators, and more.
Call (980) 246-2289 for a quote.
Quick to arrive. Careful with your home. Clean when we leave.
Calling an electrician doesn't have to be stressful, and most of the problems that send people searching for an electrician near me have a clear cause once someone looks at the right place. Dead outlets, flickering lights, a breaker that keeps tripping, a burning smell from a switch or outlet, sparks when you plug something in, or a section of the house that suddenly has no power are exactly the kinds of problems this work covers.
A dead outlet is often a tripped GFCI breaker somewhere upstream, and the fix takes minutes once the circuit is traced. Flickering lights can point to a loose connection, a failing fixture, or a wiring issue deeper in the circuit. A breaker that trips repeatedly under normal load is telling you something about the circuit's capacity or the health of the breaker itself. A burning smell is always worth taking seriously, because arcing connections and damaged insulation do not improve on their own.
When we come out, we trace the fault, explain what we found, and tell you what the repair involves before any work starts. GFCI and AFCI protection are checked in context during diagnostics, because a circuit without proper protection is often part of the same conversation. We'll find the fault and fix it right.
Scheduling a service call is simple, and we work with homeowners, landlords, property managers, and commercial clients across offices and retail spaces throughout Mecklenburg County.
On the residential side, we install outlets and switches of every type: standard, GFCI, AFCI, USB, dimmer, and smart switches that work with home automation systems. Light fixture installation covers recessed lighting, under-cabinet lighting, ceiling lights, and exterior fixtures. Ceiling fan wiring and installation is a common call, whether it is a new fan on an existing box or a full ceiling fan circuit where none existed before. Dedicated circuits for kitchen appliances, laundry equipment, and other high-draw loads are part of the same category.
For landlords and property managers, we handle the electrical side of tenant turnovers, rental property upgrades, and pre-listing inspections for home sales. Commercial clients get the same range of work applied to their space: panel capacity, circuit additions, lighting upgrades, and outlet work for offices and retail buildouts. We give straight answers about your panel and wiring so you can plan the work without guessing.
This area has every kind of panel and circuit in it, from older homes still running on 100-amp service or a fuse box to newer construction that may still need capacity added as households grow. A panel upgrade is one of the most common calls we handle, and the reasons vary.
Adding an EV charger, a hot tub, a new HVAC circuit, or a major kitchen appliance often pushes an existing panel to its limit. Home additions and remodels add circuits that the original panel was never sized to handle. Older homes with knob-and-tube wiring or aluminum branch wiring present a different set of concerns around capacity, grounding, and compatibility with modern breakers.
A service upgrade from 100 amps to 200 amps involves replacing the main panel, coordinating with the utility for the service entrance, running a load calculation to confirm the new panel size, and organizing circuits so the grounding path through the new panel meets code. Subpanel installation follows a similar process when a garage, workshop, or addition needs its own distribution point. We give a plain answer on repair versus upgrade so you know what the job actually calls for before anything is scheduled.
Huntersville sits in a four-season climate where heating and cooling loads put real demand on residential panels, and the region's severe thunderstorms, occasional tornadoes, and ice storms make backup power and surge protection practical considerations rather than optional extras. The three services below come up regularly in this area for exactly those reasons.
Aging panels in Mecklenburg County homes create two kinds of problems: capacity and reliability. A panel that was sized for a smaller household or an earlier era of appliances runs out of room quickly when a home office, an EV charger, or a kitchen renovation gets added. The upgrade process starts with an assessment of what the existing panel is carrying, a load calculation to confirm the right size for the new panel, and then installation with proper circuit organization, grounding, and bonding. Older homes with repeated breaker trips, homes adding large loads, and homes preparing for an EV charger are the most common candidates. Dead outlets usually have a simple cause worth finding.
Storm season in the Huntersville area brings the kind of weather that takes out power for hours or days. A standby generator gives a home or business a reliable fallback, but the electrical side of the installation is what makes it work safely. We handle generator hookup, transfer switch installation, and standby generator wiring. The transfer switch is the critical piece: it isolates your home's circuits from the utility line before the generator comes on, which protects both the equipment and anyone working on the line outside. We scope the electrical load, confirm panel compatibility, and wire the system to code.
A power strip with a built-in surge protector handles one outlet cluster. Whole-home surge protection installs at the panel level and covers every circuit in the building at once. In an area where summer thunderstorms are a regular occurrence, that matters for homes with sensitive electronics, home offices, EV chargers, and major appliances. Installation involves mounting a surge protection device at the main panel and connecting it to the service entrance, which takes a few hours and requires no changes to the rest of the wiring. We're one phone call from getting your power right.
Doing electrical work right matters, and we'll help you get it right, especially when it comes to EV charger installation. A Level 2 EV charger runs on a 240-volt dedicated circuit, and the installation involves running the circuit from the panel to the garage or charging location, confirming the panel has the capacity to carry the added load, and mounting and connecting the charger. If the panel is already near capacity, the EV charger conversation often becomes a panel upgrade conversation at the same time.
New circuit work comes up in other contexts too: a home addition or remodel that needs circuits roughed in before drywall goes up, a basement being finished that needs outlets and lighting, a sump pump circuit that needs its own dedicated line, or a workshop that needs 240-volt service. We confirm panel capacity at the start of every new circuit job so there are no mid-project surprises. Prompt response, even for last-minute electrical calls, is part of how we work.
You shouldn't have to chase an electrician for answers, particularly when you are buying or selling a home, preparing a rental property for a new tenant, or dealing with wiring that has not been looked at in decades. An electrical safety inspection covers the panel, the wiring, the grounding system, the outlets, and the visible portions of the circuit paths. It gives buyers a clear picture of what they are taking on, and it gives sellers the chance to address issues before they become negotiating points.
Whole-home rewiring is a larger scope of work that comes up most often in older homes where knob-and-tube or aluminum branch wiring is still in place. Both present compatibility issues with modern loads and protective devices. Arc-fault and ground-fault breakers are part of the code-compliant wiring conversation on these jobs, and we explain what is required and what is recommended so the scope is clear before work begins.
Local permit rules decide which electrical jobs need an inspection. We handle the permit side of the work where it applies and confirm what is required for your specific job before anything is scheduled.
Pricing is confirmed on the call before anything is scheduled. That applies to panel upgrades, EV charger installation, generator hookups, rewiring projects, safety inspections, and repair calls alike. You get the rate before you commit to a visit, and the scope is explained so you know what the quote covers.
We are open daily from 8:30 AM to 9:00 PM. Short-notice calls are welcome, and last-minute requests are taken when the schedule allows. If you have a question about what a job is likely to involve before you call, we can scope it on the phone and give you a clear picture of what to expect.
Start by checking your main breaker panel for any tripped breakers, then check whether a GFCI outlet in a bathroom, kitchen, or garage has tripped and needs to be reset. A single tripped GFCI can knock out outlets in several rooms at once, and that is one of the most common causes of partial power loss in Huntersville homes.
If resetting breakers and GFCI outlets does not restore power, call us at (980) 246-2289 and we will trace the fault from the panel out to the affected circuits.
A breaker that trips repeatedly under normal load is signaling a problem with the circuit, the breaker itself, or the load being placed on it. Resetting it repeatedly without finding the cause can damage wiring and connected devices over time. Call us and we will run a diagnostic to determine whether the breaker has failed, the circuit is overloaded, or there is a fault somewhere in the wiring path.
Common indicators include frequently tripping breakers, outlets that are warm to the touch, lights that flicker without an obvious cause, and wiring that has not been looked at since the home was built. Homes in older sections of Huntersville may still have knob-and-tube or aluminum branch-circuit wiring, both of which present compatibility issues with modern loads and protective devices. An electrical safety inspection will identify what is present and what, if anything, needs to be addressed.
The price depends on what the job actually involves: a single outlet replacement costs far less than a panel upgrade or a whole-home rewiring. When you call, we go over the scope and give you a rate before anything is scheduled, so you know what you are committing to. There is no single number that covers all electrical work, but a clear price is part of every call before a visit is booked.
We scope the job on the phone and give you a price that reflects what the work involves based on what you describe. If the scope changes once we are on-site, that gets discussed before the work continues, not after. You get a straight answer about the work and the cost before anything begins.
It helps to know where the problem is occurring, what symptoms you are seeing, and when the issue started. If the call is about the panel, knowing whether it is a fuse box or a breaker panel and roughly how old the home is will help us scope the job more accurately on the phone. The more detail you can share, the more precise the answer we can give you before a visit is scheduled.
We protect your floors and finishes while we work, and the job starts with confirming what was discussed on the phone before anything is opened up or tested. The work area gets assessed first, the fault or scope gets confirmed, and you are told what the work involves before it begins. We keep you informed as the job progresses, and we clean up before we leave.
It depends on the job. Diagnostic work on outlets and switches can often be done with the circuit isolated rather than the whole home powered down. Panel work, service upgrades, and any work inside the main enclosure requires the service to be off, which is coordinated in advance. We confirm what is needed for your specific job on the call.
A repair addresses the specific fault: a failed breaker, a bad outlet, a loose connection. A panel upgrade addresses the system's capacity to handle the load the home is actually running. Sometimes a repair is the right answer, and sometimes the repair reveals that the panel is the underlying problem. We give you a plain answer on which path makes sense before any work is scheduled.
Yes. We work with business owners, property managers, and commercial tenants across Huntersville and Mecklenburg County on the same range of work we handle for residential customers: circuit repairs, panel upgrades, outlet and lighting work, and wiring for buildouts and renovations. Commercial jobs are scoped and priced the same way: on the phone before a visit is confirmed.
Huntersville is our primary service area, and we cover residential and commercial properties throughout Mecklenburg County and the surrounding region. We regularly work in Cornelius, Davidson, Mooresville, Concord, Kannapolis, and Charlotte, handling everything from single-family homes and rental properties to commercial offices and retail spaces.
Panel upgraded. Circuits balanced. Home powered safely.
If you have an electrical problem to diagnose, a project to schedule, or a quote to get, call Huntersville Electrical Company at (980) 246-2289.
We are available daily from 8:30 AM to 9:00 PM, and we give you a clear price and a plain explanation before any work begins.
We handle the full range of electrical work for homes and businesses across Huntersville and Mecklenburg County. The table below lays out what each service covers, who it fits best, and a practical note to help you figure out where to start. If a job is not listed or you are not sure what you need, a quick call gets you a straight answer before anything is scheduled.
| Electrical Service | Scope of Work | Common Situations | Things to Know |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-level surge device, Full-home circuit coverage, Appliance and electronics protection | Any home in an area with frequent thunderstorms and lightning activity | A panel-level device catches voltage spikes at the service entrance before they reach any circuit. Point-of-use strips protect only what is plugged into them. |
| Wiring for Additions & Remodels | Kitchen and bathroom circuits, Garage and basement wiring, Addition rough-in | Renovation projects that need new circuits run to match the new layout | Remodel wiring often uncovers older wiring conditions behind the walls. We note what we find and explain the options before any additional scope is added. |
| Breaker & Fuse Repair | Breaker replacement, Fuse panel service, Nuisance-trip diagnosis | Homes where a breaker trips repeatedly or will not reset | A breaker that keeps tripping is telling you something about the circuit load or the breaker itself. We identify which before touching anything. |
| Dedicated Appliance Circuits | Dryer and range circuits, Hot tub and spa wiring, Workshop circuits, Disconnect installation | Any major appliance or equipment that needs its own protected circuit | A dedicated circuit means the appliance is not competing with other loads on the same breaker, which matters for both performance and safety. |
| Electrical Safety Inspections | Pre-purchase inspections, Rental property inspections, Code violation corrections | Buyers, landlords, and property managers needing a clear picture of what a system has and what it needs | We identify what needs correction and handle the repair work so the property can pass inspection. |
| Wiring & Circuit Installation | New circuit runs, Rewiring, Aluminum wiring remediation, Knob-and-tube replacement | Older homes with wiring that has aged past its useful life or does not support modern loads | Aluminum branch-circuit wiring requires specific devices and connectors rated for aluminum. Repairs done without that create risk at every connection point. |
| Lighting Installation | Recessed lighting, Exterior and security lights, Fixture replacement, Dimmer-compatible wiring | Interior remodels, outdoor security, and commercial spaces needing a full lighting layout | Commercial lighting jobs start with a circuit load check before any fixtures go up. |
| Backup Generator Installation | Transfer switch installation, Dedicated generator circuit, Panel connection wiring | Homes that need critical circuits to stay on during Mecklenburg County storm outages | We handle the electrical side only: the transfer switch, the dedicated circuit, and the wiring. The generator unit is a separate purchase and installation. |
| EV Charger Installation | Level 2 charger wiring, Dedicated 240-volt circuit, Panel capacity check | Homeowners adding an electric vehicle and needing a home charging solution | If the panel is near its limit, the EV charger conversation often becomes a panel upgrade conversation at the same time. We check capacity first. |
| Ceiling Fan Installation | New fan wiring, Fan replacement, Switch and control wiring | Rooms with no existing fan wiring or a fan being replaced with a heavier model | We assess what wiring is already there before recommending an approach, since a heavier fan may need a dedicated circuit or a stronger box. |
| Outlet & Switch Installation | GFCI outlets, 240-volt outlets, Dimmer switches, USB outlets | Kitchens, bathrooms, garages, and workshops needing the right outlet type for the load | If the outlet does not exist yet, we run the circuit. If it is the wrong type for the load, we upgrade it. |
| Electrical Repairs & Troubleshooting | Dead outlets, Tripped breakers, Flickering lights, Circuit faults | Any home or business with a symptom that needs a cause | We trace the fault from the symptom back to the source before recommending any repair, so you know exactly what is being fixed and why. |
| Electrical Panel & Service UpgradesMost Popular | Panel replacement, Service entrance work, Load calculation, Subpanel installation | Homes adding EV chargers, major appliances, or running a 100-amp panel past its capacity | Most residential upgrades land at 200 amps. We handle sizing, meter coordination, and installation so the panel matches what the home actually runs now and has room for what comes next. |
Call (980) 246-2289 to go over the scope of any electrical job and get a price before anything is scheduled. We are available every day from 8:30 AM to 9:00 PM.
(980) 246-2289